However, the latter is definitely much better when it comes to pairing, as that’s the entire purpose of BlueTooth in the first place. Most people tend to connect their B-hyve through Wi-Fi since that is more easily accessible, while also being a much more modern option compared to BlueTooth. However, if there is some issue with the master valve, then you’ll have to unclog or replace the valve to get the system working again. Ideally, bringing down the water pressure by a little margin should get everything working again. So, you’ll have to inspect the water supply to isolate the problem. Most of the time, if the water pressure is too much or the shut-off valve is cut off, then you’ll run into similar problems with the smart watering features. It is not that rare for users to run into pressure issues with the water supply attached to the sprinkler system. The issues with the smart watering system are not always related to the programming or the firmware of your smart device. If the wiring is indeed defective, then you need to either claim the warranty or replace the defective solenoid to get the system working again. So, try to test the wiring with a multimeter to make sure that you’re not in the same situation. Sometimes, you can run into this problem because of wiring issues or a defective solenoid. They will guide you through the setup process, and you won’t have to worry about missing any crucial steps.Īfter the programming has been fixed, you can wait for the next day, and the smart watering will start working. You can reach out to local experts or contact someone from tech support. The configurations for this unit are a bit complicated, and there is a possibility that you’ll be running into some issues if you’re new to this smart unit. So, you need to go through the configurations again and make use of the instructions on the owner’s manual to get everything fixed. Setting more than one start timer can create some issues with the feature where none of the zones will operate until the programming has been fixed. If you’re sure that the firmware is updated, there is a good chance that you’re dealing with configuration problems with the unit. That’ll speed up the process, and the watering features will start working. So, make sure to contact experts if you’re unable to update the firmware to the latest version. They will help you narrow down the problem, and you won’t have to spend hours in the troubleshooting process. However, if you’re having issues with updating the firmware, then you can always reach out to customer support regarding this issue. You will have to directly access the settings of your Orbit B-hyve to verify that you’re on the latest version.Īfter that, you can wait for the next watering cycle, and it should work without any issues. Luckily, it only takes a few minutes to update the firmware, and the smart watering should start working after the firmware has been updated. So, if you haven’t updated the firmware after purchasing the device, then that is probably why you’re running into problems with the smart watering on your system. The primary reason why you might be running into issues with the smart watering system is outdated firmware on your unit. How To Fix B-hyve Smart Watering Not Working? So, if you’re also having issues with the smart watering features, then the following list of solutions should help you get ahead of these issues. With that said, there have been a few complaints about the B-hyve smart watering not working. So, make sure to experiment with different configurations, and you will find the perfect settings for your yard. The smart watering features on the B-hyve unit help users better manage the water supply to the plants while also minimizing wastage.Īs long as you’ve managed the configurations well, your sprinklers won’t turn on during rain, and they will deliver the perfect amount of water to the plants each time.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |